Troubleshooting Your Polar Ice Machine: Common Errors and Faults

Polar Ice Machine: Common Errors and Faults

As a leading brand in the world of commercial refrigeration, Polar Ice Machines are renowned for their reliability and efficiency. However, like any other appliance, there comes a time when these machines may encounter some errors or faults. In this blog post, we will go straight to the point and discuss some common issues that your Polar Ice Machine might face, along with potential solutions.

Polar Ice Machine:  Fault and Description

The appliance is not working The unit is not switched on
Plug or lead is damaged
Fuse in the plug has blown
Mains power supply fault
Ambient temperature below 10°C
Water supply fault
Appliance is noisy or works intermittently Power fluctuations
Compressor runs but no ice is made Refrigerant leak or block in the refrigerant system
Water low light is On Water not connected
Water filter is blocked
Water pressure too low
Ice Full light is On Ice bin full
Room temperature is too low
Fault light is On or Water low, ice full and fault lights flash together Water box is blocked and cannot tilt or Motor system fault
When unit on, fault light flashes once every 6s or

When unit on, fault light is On but “RUN” light Off

Ice sensor fault, cannot make ice
When unit on, fault light flashes twice every 6s or

When unit on, ice full light is On but “RUN” light Off

Ambient temperature sensor fault, cannot make ice
When unit on, fault light flashes thrice every 6s or

When unit on, water low light is On but “RUN” light Off

Water temperature sensor fault, cannot make ice

Polar Ice Maker Repair London

Remember, while some of these issues can be fixed with a little troubleshooting, others might require professional attention. If your Polar Ice Machine continues to experience problems, it is advisable to contact our expert engineers to avoid further damage.

Call today 0203 488 1889!

A Handy Guide to Tefcold Fridge and Freezer Error Codes

Tefcold units may occasionally display error codes. These codes provide insight into potential issues with your fridge or freezer, enabling you to take appropriate action swiftly.

Understanding Tefcold Error Codes:

Tefcold fridge and freezer error codes are designed to help users and technicians diagnose potential problems. These codes appear on the display panel of your appliance, and each code corresponds to a specific error.

Error Code Buzzer And Alarm Relay Description
E0 Active Probe 1 error= control
E1 Not Active Probe 2 error= defrost
E2 Not Active Probe 3 error= condenser/product
IA Active External alarm
dor Active Open door alarm
LO Active Low temperature alarm
HI Active High temperature alarm
EE Not Active Unit parameter error
EF Not Active Operating parameter error
Ed Not Active Defrost ended by timeout
dF Not Active Defrost running
cht Not Active Dirty condenser pre-alarm
CHt Active Dirty condenser alarm
EtC Not Active Clock alarm
P1 Probe 1 error
P2 Probe 2 error

Responding to Error Codes:

While some error codes may simply require a reset or minor troubleshooting, others could indicate more serious issues that demand professional attention. It’s always advisable to refer to your user manual or consult an expert if you’re unsure about what an error code means or how to react.

Onsite Call-Out and Expert Engineers:

If you’re facing persistent error codes with your Tefcold fridge or freezer, our team of expert engineers is just a call away. Our onsite call-out service ensures that a qualified technician can be at your premises promptly, providing the necessary assistance and peace of mind.

Our skilled engineers are well versed with all Tefcold models and error codes. They are equipped to diagnose and rectify issues efficiently, minimizing downtime and disruption. Whether it’s a sensor fault, a defrost problem, or a communication issue, our team can handle it all, ensuring your appliance is back to optimal performance in no time. Call us now on 0203 488 1889!

write a excerpt

Understanding Scotsman Ice Machine Error Codes: A Comprehensive Guide to Scotsman Ice Machine Repair

Understanding Scotsman Ice Machine Error Codes

Scotsman Ice Machines are indisputably one of the best in the market, known for their superior quality, efficiency, and durability. But just like any other machine, they can encounter problems, and when they do, they flash error codes. These error codes can be quite bewildering if you don’t understand what they mean. Here we will help decipher these Scotsman Ice Machine error codes and guide you through simple repair processes.

Common Scotsman Ice Machine Error Codes

Here are some of the most common error codes you may encounter with your Scotsman Prodigy modular cube models: C0322, C0522, C0722, C0330, C0530, C0630, C0830, C01030, C01448, C01848, and C02148.

  •  1 – Indicates long freeze time, leading to shutdown.
  • 1 (flashing) – Signifies an attempt to retry a long freeze cycle.
  • 2 – Denotes long harvest time, resulting in shutdown.
  • 2 (flashing) – Indicates an effort to retry a long harvest cycle.
  • 3 – Reflects slow water filling.
  • 4 – Implies high discharging temperature.
  • 5 – Shows a malfunctioning sump temp sensor.
  • 7 – Displays a failing discharge temp sensor. 8 – Points out thin ice due to a short freeze cycle.
  • 8 (flashing) – Suggests an attempt to retry a short freeze cycle.

As for Prodigy flaked and nugget ice machines from Scotsman, applicable to models F0522, C0822, F1222, F1522, N0422, N0622, N0922, and N1322.

  • 1 – Indicates no ice detected, leading to shut down.
  • 1 (blinking) – Signifies no ice detected, attempting to retry.
  • 2 – Points out an overload in the auger motor, causing a shutdown.
  • 2 (blinking) – Shows an overload in the auger motor, while trying to retry.
  • 3 – Reveals an absence of water in the reservoir.
  • 4 – Suggests that refrigeration pressure is either too high or too low.

24/7 Scotsman Ice Maker Repair Service

Experiencing issues with your Scotsman Ice Machine? Don’t let it disrupt your day! We offer on-site callout and repair services in London. Trust our experts to get your machine back to perfect working order. Call us today on 0203 488 1889 for swift, efficient, and reliable service!

Your Ultimate Guide to Ice-O-Matic Ice Machine Repairs in London

London: Ice-O-Matic ice machine repairs

Whether you own a restaurant, a bar, or simply enjoy your drinks chilled at home, a reliable ice machine like Ice-O-Matic can be a game-changer. But what happens when it starts showing signs of wear and tear or completely stops working?

Why you might need Ice-O-Matic ice machine repairs

Don’t fret! This blog post will guide you through everything you need to know about Ice-O-Matic ice machine repairs in London and provide you with a list of common faults you might encounter.

Need assistance? Call our expert engineers on 0203 488 1889 now for on-site callouts and immediate solutions!

Ice-O-Matic is a leading global manufacturer of a wide range of ice-making products including cube ice makers, Flake Ice Makers, and Pearl Ice Makers. While these machines are designed to last, they may occasionally require some repair and maintenance to keep them in optimal working condition.

How professional services can help with Ice-O-Matic ice machine repairs

If you’re based in London and are in need of Ice-O-Matic ice machine repairs, there are several professional services ready to assist you. These companies have a team of experienced engineers who are well-versed with the intricacies of Ice-O-Matic machines. They can diagnose the problem quickly and efficiently, and carry out the necessary repairs to get your ice machine back to its best.

Common faults with Ice-O-Matic ice machines

Now, let’s take a look at some common faults that you might encounter with your Ice-O-Matic ice machine:

  1. Machine Not Making Ice: This could be due to a number of reasons such as a blocked water supply, a faulty ice machine thermostat, or a broken water pump.
  2. Machine Making Too Little Ice: This could be due to a dirty condenser, a low refrigerant charge, or a faulty water inlet valve.
  3. Machine Making Too Much Ice: This is usually due to a faulty ice bin thermostat or a faulty ice machine control module.
  4. Ice Tastes Bad: This could be due to dirty water filters, a dirty ice bin, or the need for a machine clean and sanitise.
  5. Machine Leaking Water: This could be due to a cracked water reservoir, a broken water pump, or a faulty water inlet valve.
  6. Machine Making Loud Noises: This could be due to a faulty fan motor, a faulty compressor, or the need for a machine clean and decalcify.
  7. Machine Overheating: This is usually due to a dirty condenser, a faulty fan motor, or a low refrigerant charge.

Importance of regular maintenance for your Ice-O-Matic ice machine

Understanding these common faults can help you diagnose issues promptly and seek help before they escalate into major problems. Remember, regular maintenance is key to the longevity and efficiency of your Ice-O-Matic ice machine.

So, the next time you face any issue with your Ice-O-Matic ice machine in London, don’t panic. Simply refer to this guide and get the necessary help. With the right care and maintenance, your ice machine will continue serving you efficiently for many years to come.

Stay cool, London. Call us now on 0203 488 1889!

Top Choice for Air Conditioning Without Outdoor Unit: Water-Cooled Systems for London’s Apartments

The Future of Air Conditioning in London: No Outdoor Unit Required

Air conditioning is a must-have feature in any building, particularly during the hot summer months. However, the installation of traditional air conditioning units can pose a challenge in apartments and listed buildings in London due to limited space and planning regulations. This is where water-cooled condensing units come into the picture. These innovative systems are designed to function without an outdoor unit, making them the perfect solution for cooling apartments and listed buildings.

Need personalized advice? Our expert team is just a phone call away at 0203 488 1889!

Understanding How Water-Cooled Air Conditioning Systems Work?

Water-cooled air conditioning systems operate differently than traditional air conditioning systems. Instead of using a gas-based system, a water-cooled unit utilises water and waste feed. The condensing unit is water-cooled, meaning the heat absorbed from the room is expelled by cooling the refrigerant through the water system. The heated water is then expelled from the system.

This process allows the unit to work without an outdoor unit. The unit can be installed discreetly without affecting the aesthetic appeal of the building, making it an appealing solution for apartments and listed buildings where planning restrictions may limit outdoor unit options.

Advantages of Water-Cooled Air Conditioning Systems – No Outdoor unit

Water-cooled air conditioning systems offer several benefits for apartments and listed buildings in London

  1. No Outdoor Unit: The most significant benefit is that an outdoor unit is not required. This is particularly helpful for listed buildings and apartments where exterior alterations are often limited
  2. Easier Planning: The absence of an outdoor unit significantly simplifies the planning process. In many cases, planning permission is not required for the installation of a water-cooled air conditioning system, saving time and effort.
  3. Space-Efficient: Water-cooled units are compact and can be installed in small spaces such as utility rooms, cupboards, or even under kitchen sinks. This makes them an excellent choice for apartments where space is often limited.
  4. Quiet Operation: Water-cooled units are known for their quiet operation. This is particularly beneficial in apartments where noise can be a concern.
  5. Energy Efficiency: Water-cooled units are highly energy-efficient. They use less electricity than traditional systems, resulting in substantial savings on energy bills.

Why Water-Cooled Air Conditioning Systems are an Ideal Solution for London’s Apartments and Listed Buildings

In conclusion, the introduction of water-cooled air conditioning systems has revolutionised cooling solutions for apartments and listed buildings in London. Their compact size, quiet operation, and energy efficiency, along with the benefit of not needing an outdoor unit, make them an ideal cooling solution. They not only offer practical benefits but also ensure the historical and architectural integrity of listed buildings is preserved, making them a win-win solution for property owners and conservationists.

Interested in finding out more? Don’t hesitate to reach out to us for any additional information. We’re just a call or message away – Contact Us!

Understanding Foster Fridge Error Codes: A Comprehensive Guide

Error codes are designed to help users identify and troubleshoot any issues that may arise with their refrigeration unit.

Please dial 0203 488 1889 to arrange an on-site Call-out or for technical advise!

Here is a comprehensive list of the most commonly encountered error codes and their corresponding descriptions.

Foster error codes:

Error code/ indication Probable Cause
dEF Defrost in progress
oFF Controller in stand-by
cL Condenser clean warning
do Door open alarm
hc Condenser high temperature alarm
t1 Instant probe 1 temperature
t2 Instant probe 2 temperature
t3 Instant probe 3 temperature
th1 Maximum probe 1 temperature recorded
hP Condenser high pressure alarm
h1 Room high temperature alarm
Lo Room low temperature alarm
E1 Probe T1 failure
E2 Probe T2 failure
tLo Minimum probe 1 temperature recorded
cnd Compressor working weeks
Loc Keypad state lock

Walk-In Cold Room Floor Repair

Walk-In Cold Room Floor Repair

For a cold room floor to function optimally, it’s important to maintain its condition and promptly address any signs of damage. The process involved in repairing a cold room floor can vary, depending on the severity of the damage.

Assessing the Damage

The first step in the process is to assess the damage. This usually involves a thorough inspection of the floor to identify any cracks, wear, or damage caused by moisture or temperature fluctuations.

Choosing the Right Repair Method

Once the damage has been assessed, the next step is to decide on the appropriate repair method. The two main options available are replacing the floor or overlaying the existing floor with ply and an Aluminium checker plate.

Replacing the Floor

If the damage is extensive, it may be necessary to replace the floor entirely. This involves removing the old flooring, preparing the base, and installing a new floor that is specifically designed to withstand the cold temperatures and heavy foot traffic typical of a cold room.

Ply and Aluminium Checker Plate Overlay

For less severe damage, an overlay may suffice. This involves laying a ply and Aluminium checker plate over the existing floor. This not only repairs the damage but also adds an extra layer of protection, effectively extending the lifespan of your cold room floor.

Feel free to reach out to us anytime on 0203 488 1889 for expert advice tailored to your needs. We’re just a phone call away!