
A cold room is three things working together: an insulated panel enclosure, a refrigeration system and the controls, doors and alarms that make it safe to use. Some UK manufacturers make complete packaged cold rooms, others make the insulated panels that installers build with, and the refrigeration usually comes from a separate specialist. Knowing which is which is the quickest way to get the right quote.
Below are established manufacturers whose cold rooms and cold store panels are sold in the UK, what each says it makes, and how to choose between a manufacturer, an installer and a contractor who brings the parts together.
UK cold room manufacturers and panel makers at a glance
| Company | What it makes | Worth knowing |
|---|---|---|
| Be Cool Refrigeration (that's us) | Bespoke walk-in cold rooms, freezer rooms, dual-temperature rooms and mortuary cold rooms, designed, built and installed | Family-run since 2004, covering London and the South East, with projects including the O2 Arena and London St Pancras station |
| Foster Coldstores | Packaged and bespoke coldrooms | Says it has manufactured coldrooms at its factory in King's Lynn since 1968, and designs, manufactures and installs them |
| Williams Refrigeration | Modular coldrooms for commercial kitchens | Offers flat-packed modular rooms and weatherproof external coldrooms |
| TEFCOLD UK | Modular cold rooms and panels | Modular constructions in a range of sizes, alongside its cabinet range |
| Viessmann Refrigeration Solutions | Cold and freezer room systems | Covers planning, installation, monitoring and maintenance as well as the rooms |
| Kingspan Insulated Panels | Coldstore insulated panels | Panels such as its QuadCore Coldstore Panel, used by builders of larger cold stores |
| Isoclad | Insulated composite panels | Manufactures composite panels, flashings and trims in the UK, including for temperature-controlled environments |
We have put ourselves first because this is our site and bespoke cold rooms are what we do. The other entries are based on what each company publishes about itself, and the right choice depends on the size of the room, where it is going and how much of it has to be designed around the building.
The companies in more detail
Be Cool Refrigeration
We design, build and install bespoke cold rooms to suit the space and the way it is used, from a compact chill store in a small kitchen to a large multi-temperature facility. Because every room is designed rather than picked from a catalogue, we can work around the things that rule out standard kits: basements, awkward footprints, low ceilings, mezzanine floors and rooms that need chilled and frozen sections side by side. We specify the panels, doors, flooring and refrigeration for each job, and our F-Gas certified engineers install, commission and service it afterwards.
That includes walk-in chillers, walk-in freezers, dual-temperature rooms and specialist mortuary cold rooms. Recent work on our projects page includes a cold room at the O2 Arena, a cold room installation at London St Pancras, a walk-in chiller and freezer for KFC Acton Vale and a cold room built with mezzanine floors.
Foster Coldstores
Foster Coldstores describes itself as a UK manufacturer since 1968, building coldrooms from its factory in King's Lynn using UK products and materials. It designs, manufactures and installs its own rooms, from packaged coldrooms to bespoke builds, and offers a choice of refrigeration types, control panels and finishes.
Williams Refrigeration
Better known for commercial fridges and blast chillers, Williams Refrigeration also makes coldrooms aimed at professional kitchens. It points out that a flat-packed modular coldroom can be easier to get into a basement or up a flight of stairs than large cabinets, and it offers weatherproof external coldrooms where there is no room inside.
TEFCOLD UK
TEFCOLD sells modular cold rooms and freezer rooms in many sizes for catering and foodservice, alongside its refrigerated cabinets. Its rooms are modular constructions designed to be installed quickly once the site is prepared.
Viessmann Refrigeration Solutions
Viessmann Refrigeration Solutions supplies cold and freezer room systems and describes its support as covering the whole lifecycle: planning, installation, monitoring, maintenance and turnkey projects.
Kingspan Insulated Panels
Kingspan is a panel manufacturer rather than a supplier of finished walk-in rooms. It makes the insulated panels that larger cold stores are built from, including the QuadCore Coldstore Panel. If you are commissioning a large cold store or a building-scale project, your contractor may well specify panels like these.
Isoclad
Isoclad manufactures insulated composite panels, flashings and trims in the UK, covering applications that need temperature control, hygiene or fire performance. Like Kingspan, it supplies the panels rather than complete rooms.
Manufacturer, installer or contractor: who does what
A packaged cold room from a manufacturer arrives as a kit: panels, door, floor if needed, and a refrigeration unit, either a monoblock that sits in the wall or roof or a split system with a remote condensing unit. Someone still has to survey the site, prepare the floor and power, assemble the room, connect and commission the refrigeration and hand over the controls and alarms.
- Buying from a manufacturer that installs keeps one name responsible for the room, which suits standard sizes and straightforward sites.
- Using an installer or refrigeration contractor lets you choose panels and refrigeration separately, which suits awkward spaces, bespoke sizes and sites where the refrigeration has to be designed around the building.
- For multi-site estates, consistency matters more than the brand. Our article on rolling out cold rooms across multiple sites covers how to keep specifications the same from site to site.
Whoever installs it, the refrigeration side must be done by F gas certified engineers, and the room will need servicing for as long as it runs. Ask who will maintain it before you choose who will build it.
What to specify before you ask for quotes
- Use and temperature. Chiller or freezer, the products stored, and the temperature range they need.
- Size and load. Internal dimensions, how much product goes in each day and how warm it is when it arrives.
- Door traffic. How often the door opens in a busy period. It drives the refrigeration size more than people expect.
- Location. Inside, outside, basement or upper floor, and the access route for panels.
- Floor. Freezer rooms usually need an insulated floor, and large freezers need protection against frost heave beneath them.
- Refrigeration. Monoblock or split, where the condensing unit and its heat will go, and which refrigerant. Our comparison of monoblock and split cold room systems explains the trade-offs.
- Safety and monitoring. An entrapment alarm and an inside release on the door, plus temperature monitoring with alerts. Our guide to cold room temperature monitoring covers what to log.
The rules a cold room has to meet
- Food temperatures. Chilled food generally has to be kept at 8°C or below in England, Wales and Northern Ireland, and most operators aim well below that. Our guide to cold room temperature regulations sets out the legal limits and the records inspectors expect.
- F gas. Refrigeration holding 5 tonnes of CO2 equivalent or more needs regular leak checks and records, and some high-GWP refrigerants cannot be used in new equipment. Our F gas guide for businesses covers the operator duties.
- Planning and building control. An external cold room is a new structure on the property, and its condensing unit makes noise. Check with the council before ordering one for outside.
Questions to ask any cold room supplier
- Is the price for supply only, or supply, installation and commissioning?
- Who designs and installs the refrigeration, and are they F gas certified?
- What refrigerant does the system use, and what is its charge in CO2 equivalent?
- What alarms, monitoring and inside door release are included?
- Who services the room afterwards, and what does the warranty require?
Questions people ask about cold room manufacturers
Who manufactures cold rooms in the UK?
For bespoke cold rooms designed and built around the space in London and the South East, Be Cool Refrigeration. Established manufacturers of packaged and modular rooms include Foster Coldstores, which says it has made coldrooms in King's Lynn since 1968, Williams Refrigeration, TEFCOLD and Viessmann Refrigeration Solutions. Kingspan and Isoclad manufacture insulated panels for larger cold stores.
What is the difference between a cold room manufacturer and a cold room installer?
A manufacturer makes the panels, doors and often a packaged refrigeration unit. An installer surveys the site, builds the room, connects and commissions the refrigeration and usually services it afterwards. Some manufacturers install their own rooms. Many projects use an installer working with panels and refrigeration from different makers.
How long does it take to get a cold room installed?
It depends on the size, the site and whether the room is standard or bespoke. Manufacturers publish their own lead times. Foster Coldstores, for example, quotes 3 to 4 weeks from quotation to installation for its rooms. Bespoke rooms, building work or a new power supply add time.
Should a cold room have a monoblock or a split refrigeration system?
A monoblock is a single packaged unit mounted in the wall or roof of the room, which is simpler and cheaper to install. A split system puts the condensing unit elsewhere, which keeps heat and noise out of the space and suits larger rooms. The right choice depends on the room and where its heat can go.
Do I need planning permission for an outdoor cold room?
Often, yes, because an external cold room is a new structure and its refrigeration unit makes noise. Ask your local planning authority before ordering one, and check whether the site's lease or building control requirements apply.
A cold room designed for your space
If a standard kit will not fit the space, the stock or the way your kitchen works, a bespoke room usually will. We have been designing, building and servicing cold rooms across London and the South East since 2004. Tell us what you need to store and where it has to go, and we will design it and quote. If an existing room is giving trouble, our cold room repair team can help.
Last updated: 4 November 2026

Written by
Ali Elm
Ali is the Head of Operations at Be Cool Refrigeration with over a decade of hands-on experience in HVAC and commercial refrigeration. He oversees every installation, repair, and maintenance project, making sure the work meets the highest standards. Ali holds full F-Gas certification and has worked across residential, commercial, and industrial refrigeration systems throughout London and the South East. When he is not on site, he writes these guides to help business owners and homeowners understand their cooling systems better.